As an hoverboarder, keeping your wheels charged and ready to roll is crucial. A quality hoverboard charger will power up your ride quickly and safely while preventing overcharging and short circuits. But with so many chargers on the market, which ones are actually worth your money? To eliminate your confusion on how to pick up the best hoverboard replacement charger, we have highlighted the best ones along with a section on how to choose them.
1. SafPow universal smart charger
The SafPow 42V 2A Charger is a fast, smart and safe choice for powering 36V lithium batteries commonly used in hoverboards, electric scooters and ebikes. With a maximum output of 42 volts and 2 amperes, this universal charger is compatible with batteries from Gotrax and other brands.
Using a constant current-constant voltage approach, this charger can quickly replenish a depleted battery to full charge at 2A. An auto-stop feature turns the charger off once fully charged, which helps maximize the battery’s lifespan over time. Six built-in protection systems guard against unsafe charging conditions like over-voltage, over-current, short circuits, overheating, reverse polarity connections and fuse issues.
2. EVAPLUS fast charger
The EVAPLUS 42V Charger is an efficient power adapter designed specifically for 36-volt lithium-ion batteries used in hoverboards, electric scooters and similar personal transportation devices. With an input range of 100 to 240 volts AC and 50 or 60 Hertz, the unit is compatible with standard residential power in the United States. The output is a consistent 42 volts DC at 2 amperes for a total power delivery of 84 watts, enabling safe and rapid recharging of compatible batteries.
3. AMPOWSURE smart fast charger
The AMPOWSURE smart charger delivers superior performance for 36V lithium batteries. Outputting up to 2A at 42V, this fast charger can rapidly and efficiently recharge depleted batteries in hours. Its 8mm 3-prong connector provides a universal fit for most 36V lithium batteries on the market.
Intelligent circuitry enables a sophisticated multi-stage charging process, automatically switching from fast charge to trickle charge to maximize battery health and lifespan. Integrated protector chips guard against overcharging, overheating, short-circuiting and overloading for safe, worry-free charging.
4. Rdideal multi-voltage charger
The high-powered Rdideal multi-voltage electric vehicle battery charger delivers efficient power for hoverboards, e-bikes and scooters. Compatible with batteries from 24 to 54.6V, this charger’s auto-detecting power supply provides the correct fast charge for your specific lithium-ion battery pack.
With a 100-240VAC 50/60Hz input and 42V 2A output, the charger is ideally suited for replenishing a depleted battery. The charger automatically shifts to float mode once the battery is fully charged, preventing overcharging. Robust short-circuit, over-current and over-voltage protections guarantee safe operation.
5. SANJOON 3 in 1 Universal Charger
The SANJOON 3 in 1 Universal Charger offers a safe and efficient charging solution for hoverboards and most electric scooters. Featuring three separate output ports, the charger is compatible with a wide range of 24V and 29.4V scooter models from major brands like Razor. The output ports come in three sizes – 0.47 inches, 0.31 inches, and 0.216 inches – to suit different scooter charging inputs. Safety is also a key focus, with a flame-retardant housing, smart overvoltage protection to prevent overcharging, and short circuit prevention.
How to choose the best hoverboard replacement charger?
Your hoverboard charger is the lifeline of your self-balancing scooter. Without it, your hoverboard won’t move an inch. So when it’s time to replace your hoverboard charger, you need to make sure you get the right one. I’ll walk you through the key things to consider when choosing a hoverboard replacement charger so you can get back to riding in no time.
Match the Voltage
The most important specification to consider is matching the voltage of your replacement charger to your hoverboard model. Most hoverboards require either a 24V, 36V or 48V charger. Check your hoverboard specifications or charging port to determine which voltage you need. Getting the wrong voltage could damage your battery and render your hoverboard unusable.
Consider the Charging Time
Hoverboard chargers come in a range of power ratings, from 0.5A to 5A or more. The higher the amperage, the faster it can charge your hoverboard. If you’re in a hurry to get riding again, choose a charger with at least 2A to minimize waiting. However, higher amperage also generates more heat, so for the health of your battery, don’t always choose the highest rated charger.
Check the Connector
Hoverboard chargers come with either a DC barrel jack connector or an XLR connector to plug into your hoverboard. Make sure the connector on your replacement charger is compatible with your hoverboard model. The connector should slide in easily and click into place. If it’s loose or doesn’t attach properly, it won’t charge your hoverboard.
How to use hoverboard replacement charger?
Follow these simple steps to get your hoverboard powered up and ready to ride.
Unbox Your Charger
Carefully unbox the charger and uncoil the cable. Inspect the charger for any damage to the cable or plug before use.
Locate the Charging Port
On the underside or side edge of your hoverboard, you’ll find the small charging port. It’s typically near one of the wheel housings. Ensure there is no dust or debris lodged in the charging port before plugging in your charger.
Plug It In
Holding the charger cable, align the plug with the charging port on your hoverboard. Gently push the plug into the port until fully inserted and locked in place.
Check the Charging Light
Once the charger is plugged in, look for a small LED light on the charger brick or hoverboard itself that indicates when charging is in progress. The light should illuminate or change from red to green when charging is complete. Leave the charger plugged in until the light indicates charging is finished.
Monitor the Charging
During the initial charge, keep an eye on your hoverboard and charger. Check to ensure the charging light remains on and your hoverboard isn’t overheating. The full charge can take up to 2 to 3 hours. Unplug the charger once charging is complete.
FAQs when picking hoverboard replacement charger
Q: How long does it take to charge a hoverboard?
A: Most hoverboard chargers take between 2 to 3 hours to fully charge the battery. The exact time will depend on the capacity of your hoverboard’s battery and the power rating of the charger. For a typical hoverboard with a 4.4Ah to 6.4Ah battery, you can expect a full charge in 2 to 3 hours using a 2A to 3A charger.
Q: Do all hoverboards use the same charger?
A: No, you should only use chargers that qualified with your specific hoverboard model. Using a charger with the wrong power rating or plug type could potentially damage your hoverboard battery. Only use chargers approved and supplied for charging your hoverboard.
Q: What happens if I overcharge my hoverboard?
A: Overcharging a hoverboard battery can reduce its overall lifespan and potential runtime per charge over time. In severe cases, overcharging the battery could lead to overheating which may damage the internal components of the hoverboard. Once your hoverboard indicates the battery is fully charged, unplug the charger right away to avoid overcharging.
Q: Can I continue using my hoverboard while it’s charging?
A: No, it is not recommended to ride or use your hoverboard while it is charging. Charging the battery can generate heat and it is best to let the battery cool down during charging. Riding the hoverboard while charging could also overload the charging circuit and damage the battery or charger. Only charge your hoverboard when it is powered off.
Q: Why does the charger get warm when charging?
A: It is normal for a hoverboard charger to get slightly warm during charging. The process of transferring power to charge the battery does generate some heat. However, if the charger becomes very hot to the touch it could indicate an issue and should be unplugged. A properly functioning charger may be warm but still touchable during hoverboard charging. If it gets too hot, unplug it and do not use it to avoid risks.
Conclusion
In summary, choosing a replacement charger for your hoverboard should not be taken lightly. You want a charger that is compatible for hoverboards, with the proper voltage, amperage, and plug type to match your board. The wrong charger could damage your hoverboard battery and degrade its performance over time. Any of the chargers in this guide would make an excellent replacement and keep your hoverboard charged and ready to ride for years to come. Just make sure to choose a charger that matches your specific hoverboard to ensure safe, efficient charging.
Enjoyed this guide of the best hoverboard replacement charger? Then be sure to check out our other outdoor gears guides.
- Best Hoverboard with Handle: Buyers’ Guide
- Best Underwater Sea Scooters: Buyers’ Guide
- Best Electric Skateboard with Remote Control: Buyer’s Guide
- Best Hoverboard with Seat Attachment: Buyers’ Guide
- Best Skateboard Helmet: The Ultimate Review
- Best Whitewater Kayak Paddles: Buyers’ Guide
- Best Duck Hunting Waders
- Best 3 Wheel Electric Scooters for Adults
- Best Electric Scooters with Seat for Adults
- Best Ebikes Under $1500
- Best Ebikes Under $1000